Motorola L402C - DECT 6.0 Corded/Cordless Phone Guide de l'utilisateur Page 6

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 50
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 5
6 Getting Started
1. Getting Started
WARNING
Do not place your phone in the bathroom or other
humid areas.
Location
When choosing a location for your new phone, here are
some important guidelines you should consider:
Avoid sources of noise and heat, such as motors,
fluorescent lighting, microwave ovens, heating
appliances and direct sunlight.
Avoid areas of excessive dust, moisture and low
temperature.
Avoid other cordless telephones or personal
computers.
Never install telephone wiring during a lightning
storm.
Never install telephone jacks in wet locations
unless the jack is specifically designed for wet
locations.
Never touch non-insulated telephone wires or
terminals, unless the telephone line has been
disconnected at the network interface.
Use caution when installing or modifying telephone
lines.
HANDSET RANGE
Optimal range is reached when there are no other
electrical appliances working within the range area.
Any obstruction between the base and handset will also
reduce the range significantly.
SIGNAL STRENGTH
When out of range of the corded base, the screen shows
OUT OF RANGE
. If you are on a call, the line will hang up.
Move back within in range. The cordless handset will
automatically re-connect to the corded base.
Setting up
IMPORTANT
The base must be plugged into an electrical outlet at all
times. Do not connect the telephone line cord into the
telephone wall jack until the handset is fully charged.
Only use the adapter and telephone line cord supplied
with the product.
WHICH POWER ADAPTER?
The power adapter with the smaller pin plug is for the
corded base unit and the power adapter with the bigger
pin plug is for the cordless charger unit.
Vue de la page 5
1 2 3 4 5 6 7 8 9 10 11 ... 49 50

Commentaires sur ces manuels

Pas de commentaire