Motorola MICOM-500E-A Spécifications télécharger pdf (Page 13)

HF-SSB Micom –500E-A

RADIO TUNING PROCEDURE

Before operating the 500W transceiver, a calibration procedure should been taken.

An IBM PC and RSS (Radio Service Software) package, FLN2514, are required

to align the radio.(factory setting)

1. On the accessories section, please mark the check box of the “1 kw Amplifier”.

2. There are 4 steps of power outputs as noted above. If you need to perform a

power calibration, please refer to the power calibration procedure in the

MICOM-2E RSS manual.

ALE

Automatic Link Establishment (ALE) is an embedded feature inside the Micom-2E/R

ALE family of mobile/fixed station HF-SSB radios.

Through the combined use of channel scanning, selective calling and Link Quality

Analysis, ALE automatically selects the best available communications link. It is no

longer necessary for an operator to be familiar with the varying factors, which affect high

frequency (HF) propagation between two points.

Each ALE equipped Micom-2 ALE family radio stores a matrix of Link Quality Analysis

(LQA) scores for all other stations in the HF network. Memorized LQA scores are

derived from an analysis of channel "soundings" which are periodically transmitted by

each network station. When an operator selects the individual or net call address of the

receiving station, ALE automatically determines the optimum available channel and

automatically initiates calling procedures. Sending and receiving operators are alerted

when a communication link has been established.

1 2 ... 8 9 10 11 12 13

Pas de commentaire

Motorola MICOM-500E-A Spécifications Page 13