Motorola STARLINE SERIES Instructions d'exploitation télécharger pdf (Page 36)

BLE*/* Installation and Operation Manual

Section 4

Bench Testing

Motorola’s recommended procedure for placing a new BLE*/* into service is to fully test it on the

bench before it is field installed. There are specific alignment procedures that ensure proper

functioning of all components and simplify final installation. If the BLE*/* is properly aligned

on the bench only minor adjustments may be required in the field.

The following subsections provide instructions to bench align the BLE*/*.

Before You Begin

The BLE*/* is shipped with a 20 ampere blade-type fuse in the output port for over current

protection.

CAUTION!

To avoid applying 60/90 Vac to the test equipment during testing, remove the fuse illustrated in Figure 2-8.

Open the housing and remove the chassis cover. Refer to your system drawings or records to

confirm the presence of the required options as described in Section 2, “Overview,” Options and

Accessories.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 48 49

Pas de commentaire

Motorola STARLINE SERIES Instructions d'exploitation Page 36