Motorola CLEARTONE CM5000 Guide de l'utilisateur télécharger pdf (Page 36)

Emergency Operation

General

Emergency Operation is available in TMO and in DMO, if the

CM5000 is in service.

Emergency Mode indication (alert tones) can be disabled by

your Service Provider.

Entering Emergency Mode

The terminal will enter Emergency Mode when you press

and hold the Emergency button.

The Emergency Mode allows you to use the PTT to transmit

with Emergency priority (by either initiating an Emergency

Group Call or requesting emergency transmit priority).

After entering Emergency Mode, your CM5000 automatically

sends an Emergency Call to predefined address and activate

Hot Microphone (if configured).

Hot Mic (Hot Microphone) allows you to talk without pressing

the PTT. Pressing PTT during Hot Mic ends Hot Mic

transmission. If Hot Mic is disabled, then use PTT to talk.

Each time you press and hold the Emergency button, the

terminal sends an Emergency Call with Hot Mic emergency

function again.

Pressing the Emergency button even if Transmit Inhibit is activated

causes immediately the CM5000 to transmit. When entering

Emergency Operation the CM5000 should not be within the RF

sensitive area any longer!

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 101 102

Pas de commentaire

Motorola CLEARTONE CM5000 Guide de l'utilisateur Page 36