Motorola hmac9100 Spécifications télécharger pdf

Introduction

Congratulations on your purchase of the Motorola homesight™

Wireless Signal Repeater. The Wireless Signal Repeater can act as an

amplifier to stretch the communication distance from your Wireless

System Controller to your system’s wireless sensor devices.

The Motorola Wireless Repeater will work with up to 16 devices at a

time.

Using Your Signal Repeater

The repeater must be placed between the Wireless System Controller

and the device whose signal you wish it to repeat. When positioning,

avoid obstructions and metallic structures that might interfere with its

functionality.

How It Works

The Wireless Signal Repeater can communicate with the Wireless

System Controller to a distance of up to 18 m indoors. The unit relays

the signals to and and from the Wireless System Controller and a

wireless device,

effectively

doubling the

communication

distance.

Installation Overview

Your package contains the following:

DATA

STATUS

Wireless Signal

Repeater

Tabletop

Base

Hardware

Mounting Kit

with

Discovery

Tool

12V Power

Adapter

Installing your repeater is a simple two-step process.

1 Choose an appropriate location for the Wireless Signal Repeater

as described in the Installation Hints.

2 Plug the AC adapter into the wall and the module.

3 Register your Repeater module with your Wireless System

Controller using a process called Discovery.

a. In the homesight software, click on System Settings.

b. Select “Device Discovery” from the menu, then select “Start

Discovery”.

c. After a few seconds, the System Controller will find and

on the screen.

4 Position the Repeater, using either the tabletop base, or by

following the instructions for wall mounting.

Installation Hints

The Motorola Wireless Signal Repeater is constructed of UV-resistant

ABS plastic. Therefore, please consider the following points when

mounting the repeater:

• Do not install the repeater where it is subjected directly to the

elements.

• This device's communication range is up to 18 m from the

Wireless System Controller in a typical home, depending on the

number of obstacles. These can include metal framing, thick walls,

and other wireless devices operating at 433 MHz. It is

recommended that different positions be tried for optimal results.

Installing Your Wireless Signal Repeater

Your repeater can either be mounted on a wall or sit on a level surface.

Wall Mount Your Wireless Signal Repeater

Warning: When mounting near a window, drilling too close to the glass

could break the glass and possibly cause it to shatter. The window

extends deeper into the frame than can be seen; therefore, ensure

your screw is beyond the glass before drilling.

1 Using the supplied double-sided tape, peel one side of the paper

strip and place it on the back of the repeater. Peel the other side

of the tape and place the repeater in the

location desired.

2 You can also mount the sensor more

securely using the screws in the hardware

kit. Using the holes on the drilling template

found later in this guide, mark the position

of the holes to be drilled. For drywall or

other composite surfaces, use a 5.6 mm

drill bit. Drill a hole for each of the mounting screws and insert a

plastic wall anchor into each hole. For other solid surfaces, use a

1.6 mm drill bit. Drill a pilot hole for each of the mounting screws.

Table Mount Your Wireless Signal Repeater

The repeater can be placed on any level surface using the included

tapabletop adapter. To attach the adapter, press the adapter into the

holes in the back of the repeater.

Troubleshooting

Problem Solution

Repeater will not register

with the Wireless System

Controller.

• Ensure that the Repeater power

adapter is plugged in to a reliable

source.

• Ensure that the Device Controller is

powered and online.

• Ensure that you are pressing the

Discovery button.

• Reposition the Repeater closer to the

System Controller.

• Try another location free of

obstacles.

Unable to discover the

device

Make sure your Wireless System

Controller indicates discovery mode and

that the Repeater is powered from a

reliable AC source. Press the Discovery

button found on the back side of the unit.

If your mounting bracket is attached,

remove it to find the discovery button

hole. If this continues to fail, you will

need to try another location for the

repeater. You may also try a hard reset

by holding down the Discovery button

while powering on the Repeater. After

resetting the Repeater, please try to

discover it again.

Feature Locator

DISCOVERY

Features and Specifications

• Wireless connectivity to the System Controller

• LED in Repeater illuminates when activity occurs

• All hardware for either wall or tabletop mounting included

• AC adapter included

Communication frequency: 433 MHz

Typical open air range (line

of sight):

60 m

Typical range indoors: 18 m

Overall size:

100mm L × 59mm W × 28mm D

Operational temperature/

humidity:

0º to 40º C with 10% to 80% humidity

with all components operating within

manufacturer thermal limits

Storage temperature: -25º F to 75º C

Discovery

Button

Controller

DATA

STATUS

1.6 mm

maximum

1 2

Résumé du contenu

Page 1 - How It Works

Introduction Congratulations on your purchase of the Motorola homesight™ Wireless Signal Repeater. The Wireless Signal Repeater can act as an amplifi

Page 2 - Limited Warranty

Wall Mount Drilling Template Mounting tools: Screwdriver, electric drill, or hand drill. On hard surfaces, Motorola recommends that you pre-drill 12.

Plus de documents pour Passerelles et répétiteurs Motorola hmac9100

Voir le document Motorola hmac9100 Guide de l'utilisateur

Motorola hmac9100 Guide de l'utilisateur (7 pages)

Commentaires sur ces manuels

Pas de commentaire

Motorola hmac9100 Spécifications

Naviguer en ligne ou télécharger Spécifications pour Passerelles et répétiteurs Motorola hmac9100. Motorola hmac9100 Specifications Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Passerelles et répétiteurs Motorola hmac9100

Commentaires sur ces manuels

Produits connexes et manuels pour Passerelles et répétiteurs Motorola hmac9100