Motorola LD-W-1 Spécifications télécharger pdf (Page 7)

English LD-G-3 / LD-W-3

Page 26

EMC declaration

This product is developed in accordance with the European standards

EN 55014 and EN 50082-1, tested corresponding to the EC - directive

89/336/EWG (EMVG of 09/11/1992, electromagnetic tolerance) and

meets legal requirements.

To guarantee the electromagnetic tolerance you must take the

following precautions:

§ Connect the transformer only to an approved mains socket installed

by an authorised electrician.

§ Make no changes to the original parts and accurately follow the

instructions, circuit diagram and PCB layout included with this manual.

§ Use only original spare parts if you have to repair the kit or the

ready-built module.

Information: Motorola I and Motorola II format

The digital driving data is differently encoded and transmitted in the

(old) Motorola I format and the (new) Motorola II format. The

locomotive decoder is designed to evaluate data in Motorola II format.

This limits its use in Motorola I format.

Since data of the auxiliary functions F3 and F4 sent in Motorola I Format

cannot be evaluated by the locomotive decoder, it is not possible to

switch these functions on or off when using Motorola I format.

Unlike the Motorola II format, no absolute direction data is sent in

Motorola I format, but a single driving signal reverses the direction of

travel. This has the following consequences:

1. If the change direction command is not recognized by the

locomotive, it continues in the original direction.

2. If the decoder is switched off for some time and the direction data is

not saved, the locomotive continues in its favourite direction when it is

switched on again.

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Pas de commentaire

Motorola LD-W-1 Spécifications Page 7