Motorola LD-W-1 Spécifications télécharger pdf (Page 10)

English LD-G-1 / LD-W-1

Page 38

Restrictions in Motorola I format

In Motorola I Format the following settings can be made:

§ Address, starting and maximum velocity

§ assignment of the funciton outputs to „function“

A reset and reading the address is not possible. It is not possible to

program the second velocity characteristic or the acceleration and brake

delay. The functions F1 to F4 cannot be switched.

Technical specifications

Data format Motorola II

Supply voltage 12-24 Volt digital voltage

Current consumption

(without connected loads) approx. 10 mA

Max. current for motor 1.000 mA

Max. current per function output 500 mA

Max. total current 1.500 mA

Protected to IP 00

Ambient temperature in use 0 - + 60° C

Ambient temperature in storage -10 - + 80° C

Comparative humidity allowed max. 85 %

Dimensions approx. 16,8 x 24 x 4,5 mm

Weight approx. 2 g

Checking the package contents

Check the contents of the package for completeness immediately after

unpacking:

§ one decoder, with or without soldered connecting wires, depending

on the version,

§ one manual.

N.B. For technical reasons it is possible that the PCB is not completely

inserted. This is not a fault.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Pas de commentaire

Motorola LD-W-1 Spécifications Page 10