Motorola i90c Manuel d'utilisateur télécharger pdf

Disassembling Motorola i90c

Headphone Jack

Written By: Grant Glazebrook

TOOLS:

Tweezers (1)

SUMMARY

This guide details how to remove and replace the headphone jack.

Step 1 — Battery

Slide the notch downward while pulling the back cover off to remove it.

Disassembling Motorola i90c Headphone Jack

1 2 3 4 5 6

Résumé du contenu

Page 1 - Headphone Jack

Disassembling Motorola i90cHeadphone JackWritten By: Grant GlazebrookTOOLS:Tweezers (1)SUMMARYThis guide details how to remove and replace the headpho

Page 2 - Step 3 — Antenna

Step 2 Use your fingers to push the battery upward from the bottom.Lift upwards to remove the battery.Step 3 — Antenna Unscrew the antenna in a coun

Page 3 - Step 4 — Internal Backplate

Step 4 — Internal Backplate Unscrew the 3 screws shown.Lift up the right part of the Nextel logo and unscrew the screw underneath.Step 5 DO NOT forc

Page 4 - Step 7 — Logic Board

Step 6 Carefully pry off the connection between the headphone jack and logic board.Step 7 — Logic Board Lift the first logic board off of the rest o

Page 5

Step 8Gently lift the second logic boardfrom the rest of the device.DO NOT force the boardstraight off as it coulddamage the ribbon cable!Step 9 Using

Page 6 - Step 10 — Headphone Jack

To reassemble your device, follow these instructions in reverse order.This document was last generated on 2012-12-20 03:30:04 AM.Step 10 — Headphone J