Accessories
Installation and Operation
Instructions
Mercedes-Benz Bluetooth
®
Cradle for
Motorola V3 RAZR phone
© 2007, Daimler AG
12/06
03F035-06
Order No. S-3 155-06A
1
M+P-03F-6635
1
খ
Application
These installation instructions are valid for
vehicles with an MHI hands-free communi-
cation system and a Mercedes-Benz-appro-
ved Motorola RAZR phone with approved
software level. Approved mobile telephones
are listed and can be purchased on the Inter-
net at www.wireless4mb.com or call
1-800-910-1021 to speak to a wireless acti-
vation specialist.
Parts included
• (1) Mercedes-Benz Bluetooth
®
Cradle
for Motorola RAZR phones
Note
Please contact your local Mercedes-Benz
Center if you encounter difficulties when
operating the Mercedes-Benz Hands-Free
Communication System.
More information can be found on the Inter-
net at www.wireless4mb.com or call
1-800-910-1021 to speak to a wireless acti-
vation specialist.
We reserve the right to change technical de-
tails from those shown in the illustrations
contained in these installation instructions.
These installation instructions also refer to
the Vehicle Operator
’s Manual, COMAND
Operator
’s Manual, and mobile telephone
manual. Please keep them available for refe-
rence.
2
Contents
Installing the Mercedes-Benz V3
Cradle
컄 4
Inserting mobile telephone
컄
5
Pairing the Motorola RAZR
phone with the Mercedes-Benz
V3 Cradle
컄 7
Establishing a Bluetooth
®
connection
컄 9
Connecting the Motorola RAZR
phone and Mercedes-Benz V3
Cradle manually
컄 11
Disconnecting the Bluetooth
®
connection automatically
컄 12
Disconnecting the Bluetooth
®
connection manually
컄 12
Removing Motorola RAZR phone 컄 13
Detaching the Mercedes-Benz
V3 Cradle
컄 14
3
GWarning
Always use approved phones with
the Mercedes-Benz V3 Cradle. Ope-
rating a non-approved phone or ra-
dio transmitter with its own
attached or built-in antenna while
the engine is running can interfere
with the vehicle’s electronic system.
For safety reasons, the driver should
not use the mobile phone while the
vehicle is in motion. We encourage
the driver to stop the vehicle in a
safe location before answering or
placing a call.
4
Installing the Mercedes-Benz V3 Cradle
1. Insert the Mercedes-Benz V3 Cradle (1)
into the latches on the pre-installed MHI
contact plate (2), located in the center con-
sole. Availability varies by model, see dealer
for details. To insert the Mercedes-Benz V3
Cradle (1), slide it upwards until it clicks into
place.
2
1
M+P-03F-6636
Commentaires sur ces manuels