Motorola MPC564EVB Manuel d'utilisateur télécharger pdf (Page 4)

MPC562BC 10/31/02

Features

The MPC562BC Badge Card is an evaluation board for the Motorola MPC562 PowerPC microcontroller. The board provides for

evaluating target applications applied to MPC562 microcontroller. The evaluation system is Plug and Play with the supplied Debug

Monitor firmware in the on-board 16M Byte flash memory. Other features include the Power Oak MPC500 series companion power

supply, RS232 and CAN communication ports, a MC33291 driver with Output port, and User Switches and Indicators. The kit

version provides Serial Cable, Wall Plug power source, printed hardware manual, and the MPC5xx support CD with example

software, support software, GNU C/C++ compiler, and technical manuals. For MPC562 hardware or software Development support

refer to the MPC564EVB, CME564, or CMD-562 development boards. Note: The MPC564 is identical in operation and features to

the MPC562 but also provides internal flash memory.

MPC562BC

MPC562 Badge Card Features (MPC562BC)

• MPC562 Microcontroller capable of 56Mhz operation

• 4Mhz reference oscillator

• Flash Memory, 4M x 32 (2 x AMD AM29LV640M)

• Power Oak (MC33394) Power supply w/ CAN_A transceiver, QSPI_A controlled.

• BDM Development Port, 10 pin standard with 3.3 or 2.6V optional I/O.

• COM1 - SCI_1 w/ RS232 type DB9-S Connection

• CAN_A Port - 1 x 4 header with CAN_A channel from Power Oak transceiver

• QSM Port - 2 x 10 pin 2mm header with QSM and CAN I/O

• MIOS Port - 2 x 10 pin 2mm header with MGPIO digital I/O.

• TIMER Port - 2 x 10 pin 2mm header with MDA and PWM I/O.

• TPU_A Port - 2 x 10 pin 2mm header with Timing Processor I/O.

• QADC_A Port - 2 x 10 pin 2mm header with Analog I/O.

• OUTPUT Port - 1 x 10 pin .1 inch header with MC33291 outputs, QSPI_A controlled.

• POWER Port – no header, Power supply access.

• Power Indicators - Supply voltage indications for 5, 3.3, and 2.6V supplies

• Reset Switches - POR and Hard reset buttons.

• User Components:

• 8 indicators, Output port controlled or by user connections to I/O.

• 4 push switches, QADC_B inputs, SW1 option for Monitor Abort or Break function.

• Debug Monitor firmware installed in flash.

• Hard Reset configuration is fixed, No bus access by header pins.

Wall-

Power

To Host PC

Serial COM

Port

1 2 3 4 5 6 7 8 9 ... 16 17

Pas de commentaire

Motorola MPC564EVB Manuel d'utilisateur Page 4