Motorola VC6000 Series Manuel du propriétaire Page 28

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 40
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 27
26 VC6000 Series Vehicle Computers
Controlling Keypad Illumination
There are five levels of Keypad Illumination. To adjust the Keypad
Illumination:
1. Press the Ctrl key to lock in down position.
2. Press the Brightness up/down key to increase/decrease the keypad
illumination. The VC6000 series automatically returns to normal
operation after six seconds if the up/down key is not pressed.
3. Press the Ctrl key to unlock in up position.
Standby Mode
Standby mode is a power saving mode enabled only when the vehicle
ignition key is switched to the OFF position.
In Standby mode, the screen display and backlight illumination
automatically turn off after a period of two minutes when VC6000 series
is not active.
Resume from Standby Mode
To resume from Standby mode, press any
key, or touch the screen, or momentarily press
the Power Button .
The VC6000 series can be set to
automatically resume from Standby mode
when: turning On the ignition key, connecting
or removing a USB device, pressing a
keyboard key, receiving an alarm, pressing the touch screen,
communicating over Bluetooth, communicating over WWAN.
Resetting the VC6000 series
If the VC6000 series stops responding to inputs, perform the reset
actions in the following order:
Power Button
Vue de la page 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

Commentaires sur ces manuels

Pas de commentaire