Motorola VC6000 Series Spécifications Page 143

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 164
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 142
Maintenance & Troubleshooting 10 - 5
Tapping the buttons
or icons does not
activate the
corresponding
feature.
Screen is not calibrated
correctly.
Re-calibrate the screen. Tap Start > Settings > System tab >
Screen icon > Align Screen button.
The system is not
responding.
Warm boot the system (see Resetting the VC6000 Series on
page 1-10).
A message appears
stating that the
VC6000 Series
memory is full.
Too many files stored on the
VC6000 Series.
Delete unused memos and records. If necessary, save these
records on the host computer (or use an SD memory card for
additional memory).
Table 10-1
Troubleshooting the VC6000 Series (Continued)
Problem Cause Solution
The VC6000 Series
does not power on.
Vehicle ignition key in OFF
position.
Switch the vehicle ignition key to the ON position.
SIM door is open. Close the SIM door properly and secure screw.
Drained vehicle battery. Charge or replace battery.
Vehicle battery not installed
properly.
Ensure battery is installed properly.
System crash. Press the Power button. If the VC6000 Series still does not turn
on, Perform a warm boot. If the VC6000 Series still does not turn
on, perform a cold boot. (see Resetting the VC6000 Series on
page 1-10).
Low Battery level
warning is issued.
Vehicle battery Voltage
dropped below 9 V DC.
Start the vehicle engine to charge the battery.
Replace battery.
LCD and Keypad
backlight do not
function.
Critical Battery level. Vehicle
battery Voltage dropped
below 8V DC.
Start the vehicle engine to charge the battery. Replace battery.
Display backlight
intensity is reduced.
Display temperature is below
10 °C or above 35 °C (below
50 °F or above 95 °F).
Control the temperature inside the vehicle.
The VC6000 Series
powers off during
operation.
VC6000 Series temperature
is out of range: -20 °C to 60
°C (-4 °F to 140 °F).
Control the temperature inside the vehicle.
To resume operation, momentarily press the Power Button.
Vue de la page 142
1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 163 164

Commentaires sur ces manuels

Pas de commentaire