Motorola T1/E1 Manuel d'utilisateur

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 Motorola TEAM WSM Configuring the Dialogic DMG2000 T1/E1 Gateway with an Avaya Communications Manager

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 14. Restart the media gateway by clicking Restart in the left navigatio

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 a. DCS (Basic)? b. DCS Call Coverage? c. DCS with Rerouting? 16. Go to the next page (page 4) and m

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 18. Go to the QSIG Optional Features page (page 8) and make sure that the following fields are set to

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 field. Finally put in any unused extension number in the QSIG Path Replacement Extension field. 20. T

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 c. Line Encoding: b8zs d. Line Compression: 1 e. Framing Mode: esf f. Signaling Mode: isdn-pri g.

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 e. Max number of CA TSC: 10 f. Trunk Group for NCA TSC: <Trunk Group number to be used> Note: y

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 26. Go to the next page (page 3) and set the following parameters: a. NCA-TSC Trunk Member: 23 b. Se

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 28. Click to the next page (page 5) and fill in the ports where the physical cabling

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 30. Type in change route-pattern 1(or whatever route pattern you want to us

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 31. Type in change aar analysis 0. Set the following parameters: a. Dialed String: <matching dig

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 Meet-me Conference Multiple Call Appearances (4)

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 32. Configure the Private-numbering Format by using the command change private-numbering 0. 33. Type in

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 34. Type in busyout board <board location>. 35. Type in release board <board location>.

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 37. Create a voice mailbox for each of the Motorola TEAM handsets in the Avaya Audix voicemail syste

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 39. Once everything has been tested and working, save the configuration file in the Dialogic by going

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 End of Procedure

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 Intentionally Left Blank

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 Procedure WSM Configuration 1. Under the WSM Configuration screen make sure None/TCP is selected for

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 3. Under the WLAN Handsets tab, configure the PBX Type parameter as TDM Gateway – QSIG. Also put in t

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 6. On the left navigation window, click on Routing Table. Click on the VoIP Host

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 7. Select the TDM Trunk Groups radio button. It may be there already but create a Trunk Group by click

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 9. In the left navigation window, under Configuration, mouse over TDM and click on T1/E1. Put in the

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 10. In the left navigation window, under Configuration, mouse over TDM and click on General. Make sure

Ed. 01 Advanced Lab Guide 1.72 – Rev. E 7D-1 12. In the left navigation window, under Configuration, mouse over VoIP and click on General. Put in t