Motorola SB6182 Guide de l'utilisateur

Naviguer en ligne ou télécharger Guide de l'utilisateur pour Mise en réseau Motorola SB6182. Motorola SB6182 User guide Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
SURFboard
®
SB6182
DOCSIS
®
3.0 Cable Modem
Install Sheet
IMPORTANT
1. Power ON the computer and log in. Check that the Receive,
Send, and Online LEDs on the modem are lit SOLID (not
flashing). See next page for more LED information.
Note: If all three LEDs did not turn ON, check each cable
connection (coaxial, Ethernet, and power) and hand-tighten, if
necessary. Contact your service provider if problem continues.
2. Open a web browser of your choice, such as Internet Explorer,
Firefox, or Google Chrome.
3. Type any valid URL (for example, www.motorola.com) in the
address bar to test the network connection.
- If the web page opens, the modem was set up properly.
- If the web page does not open, you may have to contact your
current service provider to set up your Internet service or
activate your modem.
Please contact your service provider if you do not already have
a cable service installed or you do not currently subscribe to a
high-speed cable service.
You may need to provide your modem’s MAC address and
serial number (see next page for details).
Before starting, make sure of the following:
• Cable service is up and running.
• Coaxial cable is already connected to the homes cable outlet. If
not, contact your service provider.
• Computer is turned OFF.
Connecting the Modem
Starting the Modem
Additional product information is available in the SB6182 Cable Modem User Guide.
Please visit www.motorola.com/us/support.
1. Connect the coaxial cable to the cable outlet (or cable splitter)
and the other end to the Cable connector on the rear of the
modem.
2. Plug the power cord into the Power port on the rear of the
modem and the other end into an electrical outlet. This will
automatically power ON the modem.
3. Connect the Ethernet cable (included) to the Ethernet port on
the rear of the modem and the other end to the Ethernet port
on the computer (or other device).
Vue de la page 0
1 2

Résumé du contenu

Page 1 - SURFboard

SURFboard® SB6182DOCSIS® 3.0 Cable Modem Install SheetIMPORTANT1. Power ON the computer and log in. Check that the Receive, Send, and Online LEDs on

Page 2

MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. SURFboard is a registered trademark of M

Commentaires sur ces manuels

Pas de commentaire