Motorola F5207A, F5217A Guide d'installation télécharger pdf (Page 20)

14 MW 800 Vehicle Installation Guide

MW 800 Display

The MW 800 display is attached to the display mount by Phillips screws (M4), supplied in

the display shipping carton. The Display Signal Cable is routed from the CPU box, through

the mount, and connected to the lower back side of the display. Use caution when assembling

the cable to the display, to prevent damage to the display or the cable. Form a service loop for

the Power and Display Signal Cables to reduce cable tension. Use plastic cable ties to secure

the cables to cable tie points.

Long Display Signal Cables (longer than 3 Meter, 9.14 foot) should be routed

inside protective ducts to avoid damage

Figure 10

Display Cable Route

Display Signal Cable

USB Keyboard Cable

Allow Service

Loop

Power Cable

Caution

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 54 55

Pas de commentaire

Motorola F5207A, F5217A Guide d'installation Page 20