Motorola F5207A, F5217A Guide d'installation télécharger pdf (Page 25)

Installation 19

W-WAN Antenna Connection

Connect the vehicle RF antenna cable connector (Mini UHF) if an internal Wireless Wide

Area Network (W-WAN) radio is installed (iDEN, GPRS, DataTAC). If the RF Power

Amplifier is used, this connection is made to the RF-IN connection on the RF Power

Amplifier, and the vehicle antenna is connected to the antenna connector on the RF Power

Amplifier.

W-LAN Radio (802.11b) Connection

Connect the vehicle RF antenna cable connector (reversed SMA) if internal Wireless Local

Area Network (W-LAN) radio is installed.

GPS Connection

The MW 800 may be supplied with an optional Global Positioning System (GPS) card.

Connect the GPS cable to the GPS connector on the CPU box rear panel on one side and to

the GPS antenna connector on the other side.

Video In Connection

Standard Composite video input (CVBS). The MW 800 is equipped with a BNC type

connector to which a video camera can be connected. A BNC to RCA adapter 5802810C07 is

also available from Motorola, if required.

Display Connections

Standard Interfaces Red Green Blue (RGB) connection for two display units (F5206 &

F5207). DVI interface is available for the secondary display of F5207.

Figure 16

12” Display Connections

To Vehicle Power

System

To USB Peripheral Device

To Keyboard

Display

USB 1

USB 2

Display Signal

Cable

15 A Fuse

DC Cable

DC Power

For 8.4" display connections, please refer to

the installation manual of the 8.4” display

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 54 55

Pas de commentaire

Motorola F5207A, F5217A Guide d'installation Page 25