Motorola F5207A, F5217A Guide de l'utilisateur télécharger pdf (Page 12)

Inspect all the items. If any item is missing or damaged, notify your Motorola

Customer Service representative immediately.

Installation and Connecting to Car Battery

Please, refer to the Mobile Workstation 800 Installation Manual and strictly follow

the installation procedure. Be aware that your device can be damaged if improperly

installed.

Turning On

Perform the following steps to turn on the MW800.

• Turn the main power switch (MAIN SWITCH) to ON. The switch is located

on the back panel of the CPU box

• Press the power button on the CPU box or the display front panel

• Wait until Windows operating system starts

NOTE: The MW800 can be configured so that the vehicle ignition switch, the power

button located on the CPU front panel, or the display power button can turn it on.

Find more details in Section 4.

CAUTION: Be aware, the CPU and the display have the same Power On scheme.

Turning Off

Use the Windows operating system Shut Down dialog box to turn off the MW800.

NOTE: The MW800 can be configured so that the vehicle ignition switch, the power

button located on the CPU front panel, or the display power button can turn it off.

Find more details in Section 4.

CAUTION: Be aware, the CPU and the display have the same Power Off scheme.

CAUTION: Remember to save important information before turning off your

workstation.

CAUTION: Never shut down your workstation by turning off the main power

switch on the back panel of the CPU box while the Operating System is working.

Doing so can damage your hard disk.

CAUTION: Be aware, that rapid turning off and on can damage your hard disk. If

you need to turn the MW800 on immediately after turning it off, always wait for the

shut down process to complete.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 55 56

Pas de commentaire

Motorola F5207A, F5217A Guide de l'utilisateur Page 12