Motorola GP68 Manuel d'utilisateur

A High Performance Radio In A Class Of Its Own Key Features: Wide Frequency Bands Adaptive Power Control™ P

To verify the frequencies programmed, from the Channel Display mode, press the X key to toggle between Channel Display and Frequency Display modes. R

Carrier Squelch (CSQ), Private-Line (PL) and Digital Private-Line (DPL) Codes rPL xxx PL Tone Equiv. tPL xxx (Hz) PL Code 000 CSQ - 001 67.0 XZ

The Special Programming mode (SPM) allows you to edit all user-modifiable parameters within your radio, such as the Channel Scan list, Phone Access/

Edit the Channel Scan List 1. Rotate the selector switch to select the St menu item. 2. Use (Left Arrow) or (Right Arrow) to scroll through the

Edit Time Out Timer This menu item allows you to select the Time Out Timer length. 1. Rotate the selector switch to select the Edit Time Out Timer

Placing a Telephone Call To place a call using manual access/ deaccess codes: 1. Press and hold PTT and then dial the access code using the DTMF k

To Store a Phone Number 1. Press and hold (MEM) until the radio sounds a second valid keypress tone (takes about 2 seconds). The LCD display indi

To Display a Stored Phone Number 1. Press (MEM) momentarily in the receive mode. 2. Enter a one-digit phone number location, in the range 0 to 9,

If your radio is equipped with the Voice Selective Call option, your radio can be called individually by another user, or as part of a small group.

Cloning duplicates the contents of Radio 1 (master radio) into Radio 2 (slave radio). Only current radio configuration, channels and phone numbers a

Turn Radio On 1. Rotate rotary knob clockwise to turn radio on. Turn Radio Off 1. Rotate rotary knob counter-clockwise until a click is heard to

Cloning Cable Pinout Programming Cable Pinout The programming cable is used for aligning the radio with the Motorola Radio Service Software (R

Low Battery Alert The “BATT” indicator in the LCD continuously flashes whenever the radio has a low battery condition (in receive or transmit mode).

To Receive 1. Release PTT to hear voice activity on selected channel. To Change Squelch Modes Carrier squelch (CSQ). Tone Private-Line (PL) and

When programmed to do so, your GP-68 will quickly SCAN the channels you want it to. To Scan Channels 1. Press (SCAN/D) momentarily to begin ch

Nuisance Channel Delete in Scan When the radio scans to a channel that you do not wish to hear, you can temporarily remove the channel from the scan

Dealer Program Mode (DPM) - To Enter Dealer Programming Mode 1. Switch Radio Off. 2. Hold Down the PTT Monitor and Scan Buttons While Turning the

Programming Controls "Figure A" Note that the ENTER key is on the side of the GP-68, very near the top.

Programming Your Channels All programming is performed while the GP-68 is in Frequency Display Mode. When you first turn the radio on, the display wi