Motorola RF Amplifier Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Récepteurs et amplificateurs Motorola RF Amplifier. Motorola RF Amplifier User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 8
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
RF Amplifier Quick Start Guide
STARLINE
®
RF Amplifier
Quick Start Guide 498160-001
Motorola’s STARLINE RF amplifier series share many common features, functions and safety
precautions. This Quick Start Guide is intended to cover basic installation and operation
procedures common to all amplifiers. To obtain complete product documentation and compliance
information for your specific amplifier, go to http://www.motorola.com/broadband
and click
HTML/Modem Version/Customer Support/Product Documentation/Manuals.
Before you begin to install your amplifier, verify the model number and confirm that it
accurately reflects the product configuration and options that you ordered.
CAUTION!
To avoid possible injury to personnel or damage to the equipment, remove 60/90 volt ac power from the system
before you install the amplifier.
Document Conventions
Before you begin using the RF Amplifier Quick Start Guide, familiarize yourself with the
stylistic conventions used in this manual:
SMALL CAPS
Denotes silk screening on the equipment, typically representing front- and rear-panel
controls and input/output (I/O) connections, and LEDs
* (asterisk)
(asterisk)(asterisk)
(asterisk)
Indicates that several versions of the same model number exist and the information applies
to all models; when the information applies to a specific model, the complete model number
is given
Italic type
Denotes a displayed variable, or is used for emphasis
Installing the Housing
STARLINE amplifiers are mounted horizontally below the strand or on a pedestal. To reduce
the weight of the amplifier and prevent possible damage, it is recommended that you remove the
electronics chassis before you install the housing.
To install the amplifier on the strand, use the two strand clamp assemblies located on the long
side of the housing and torque to 10 to 12 ft-lbs.
To install the amplifier on a pedestal, use the bolts from the strand clamps and the two holes on
the bottom of the housing. Torque the bolts to 10 to 12 ft-lbs. The centerline distance between
the holes on the bottom of the housing is:
Amplifier Model Distance Between Hole Centers (inches)
BLE*/*
4.0 vertical centerline
MB*/*, MBE*/*
7.7 horizontal centerline
BT*/*
11.0 horizontal centerline
Vue de la page 0
1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - Quick Start Guide 498160-001

RF Amplifier Quick Start Guide STARLINE® RF Amplifier Quick Start Guide 498160-001 Motorola’s STARLINE RF amplifier series share many common featur

Page 2 - Powering the Amplifier

2 STARLINE RF Amplifier Quick Start Guide Installing the Coaxial Cables Connections to the housing are made using standard KS-type housing port ent

Page 3 - Forward Path Alignment

STARLINE 3 RF Amplifier Quick Start Guide Forward Path Alignment The following subsections describe procedures required to obtain proper forward

Page 4 - 4 STARLINE

4 STARLINE RF Amplifier Quick Start Guide 5 Verify that the input level agrees with the design specification input. If the level is different from

Page 5 - Automatic Drive Unit

STARLINE 5 RF Amplifier Quick Start Guide If necessary, to achieve the gain specification, you can use the interstage pad or output pads to reduc

Page 6 - Return Path Alignment

6 STARLINE RF Amplifier Quick Start Guide ADU Pads and Levels A JXP pad is installed in the input line to the ADU location. This pad adjusts the AD

Page 7 - Alignment Procedure

STARLINE 7 RF Amplifier Quick Start Guide Alignment Procedure To align the return path: 1 If the amplifier is powered, remove all fuses before y

Page 8 - If You Need Help

8 STARLINE RF Amplifier Quick Start Guide 6 Close the housing and use a torque wrench to sequentially and progressively tighten the housing bolts i

Commentaires sur ces manuels

Pas de commentaire