Motorola AP-5181 - Wireless Access Point Spécifications
Naviguer en ligne ou télécharger Spécifications pour Routeurs Motorola AP-5181 - Wireless Access Point. Motorola AP-5181 - Wireless Access Point Specifications Manuel d'utilisatio
- Page / 2
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
To the Installer
This guide is intended for the technician responsible for installing the AP-5181 model access
point. It assumes the technician is familiar with basic Ethernet LAN-based networking and
device installation concepts. This guide provides specifications, procedures and guidelines to
use during the installation process. This guide does not provide site-specific installation
procedures. For detailed site-specific installation procedures, refer to the site-specific
documentation derived from site survey and site network analysis.
Note - This AP-5181 Installation Guide is intended to assist installers with the installation of
the AP-5181. Once secured in its intended operational position, refer to the AP-51xx Product
Reference Guide for detailed instructions on configuring the access point’s feature set. For
more information, go to http://www.symbol.com/manuals
.
Verifying Package Contents
Inspect the contents and report any missing or damaged items to your sales representative.
The AP-5181 access point ships with the following components:
• 1 AP-5181 802.11 a+/jointfilesconvert/395548/bg dual-radio access point (AP-5181-13040-WWR)
• 1 AP-5181 Installation Guide (this document)
• 1 set of cable connectors
• 3 antenna connector dust covers
• 2 connector cover AP67 jacks, plus chain_LTW-M9/14-SB
• 1 Waste Electrical and Equipment (WEEE) addendum
Note: A RJ-45 to Serial (9-pin D) cable is required to make a connection to the AP-5181’s
Console port. This cable is not supplied and must be provided by the customer.
To mount the AP-5181 access point to a pole (1.5 - 18 inches in diameter) or wall, an AP-5181
Mounting Kit (Part No. KT-5181-WP-01R) can be separately ordered. This kit contains the
brackets and accessories required to mount the access point.
If installing the AP-5181 in an outdoor area prone to high winds and rain, Motorola
recommends using the AP-5181 Heavy Weather Kit (Part No. KT-5181-HW-01R).
This kit affords additional protection to shield an AP-5181 from high wind and water
damage as a result of driving rain.
If using a single-port Power-Over-Ethernet solution to supply power to the AP-5181,
Motorola recommends using the AP-5181 Power Tap (Part No. AP-PSBIAS-5181-01R).
This single-port power injector is designed specifically for outdoor use with the AP-5181.
Safety Information
Before operating any equipment, review this document for any hazards associated with
installation and use of the device. Also, review standard practices for preventing accidents.
• Only trained and qualified personnel should install and remove the Power Injector.
• The power cord must be a three-conductor type (two current carrying conductors and one
ground conductor) terminated on one end by an IEC 60320 appliance coupler (for Power
Injector connection) and on the other end by a plug containing a ground (earth) contact.
• The power cord must be rated for a minimum of 250VAC RMS operation, with a minimum
rated current capacity of 5A [or a minimum wire gauge of 18AWG (0.75mm²)].
• The AC wall-socket outlet must be near the Power Injector and easily accessible.
• The Power Injector Data and Data & Power interfaces are qualified as SELV (Safety
Extra-Low Voltage) circuits according to IEC 60950. These interfaces can only be
connected to SELV interfaces on other equipment.
Warnings
• Read the installation instructions before connecting the Power Injector to a
power source.
• Follow basic electricity safety measures whenever connecting the Power Injector to its
power source.
• This product relies on the building installation for short-circuit (over current) protection.
Ensure a fuse or circuit breaker no larger than 120 VAC, 3A U.S. (240VAC, 1.5A
international) is used on the phase conductor.
• A voltage mismatch can cause equipment damage and could pose a fire hazard. If the
voltage indicated on the label is different from the power outlet voltage, do not connect
the Power Injector to that particular outlet.
• The Power Injector Data In and Data & Power Out ports are shielded RJ-45 sockets.
Only RJ-45 data connectors should be connected to these sockets.
Service Information
Before using the unit, it must be configured to operate in the facility’s network and run your
applications. If you have a problem running your unit or using your equipment, contact your
facility’s Technical or Systems Support. If there is a problem with the equipment, they will
contact the Motorola.
For the latest version of this guide go to http://www.symbol.com/manuals
.
MOTOROLA INC.
1303 E. ALGONQUION ROAD
SCHAUMBURG, IL 60196
www.motorola.com
United States 1-800-653-5350
1-631-738-2400
Canada 905-629-7226
United Kingdom 0800 328 2424 Asia/Pacific +65-6796-9600
Australia 1-800-672-906 Austria/Österreich 1-505-5794-0
Denmark/Danmark 7020-1718 Finland/Suomi 9 5407 580
France 01-40-96-52-21 Germany/Deutschland 6074-49020
Italy/Italia 2-484441 Mexico/México 5-520-1835
Netherlands/Nederland 315-271700 Norway/Norge +47 2232 4375
South Africa 11-8095311 Spain/España 91 324 40 00
Inside Spain
Sweden/Sverige 84452900 +34 91 324 40 00
Outside Spain
Latin America
Sales Support
1-800-347-0178 Inside US
+1-954-255-2610 Outside US
Europe/Mid-East
Distributor Operations
Contact local distributor or call
+44 118 945 7360
AP-5181 Access Point
Installation Guide
72-117415-01
Revision A October 2008
(2)
(1)
(3) (4) (5) (6)
Introduction
The AP-5181 is a ruggedized access point designed for outdoor deployments. The AP-5181
employs a dual-mode simultaneous 802.11a and 802.11g radio solution. Unlike the AP-5131
model access point, there is just the one dual-radio mechanical version of the AP-5181 (no
single radio model is available).
Product Description
The AP-5181 has a separate LAN and WAN port for connecting to the network and receiving
power (over the AP-5181’s LAN port only). The AP-5181 has four antenna connectors (on top)
supporting 802.11a and 802.11g antenna options. However, the AP-5181 antenna suite is
designed for outdoor deployments, so the existing AP-5131 antenna suite should not be used
with an AP-5181. The AP-5181’s mode of operation is identical to the AP-5131’s.
Mounting the AP-5181
The AP-5181 can be mounted to a pole (1.5 - 18 inches in diameter) or to a wall. The AP-5181
Wall Mounting Kit (Part No. KT-5181-WP-01R) is not included with AP-5181 and must be
ordered separately.
The mounting bracket has four parts. One rectangular plate used for pole and wall mounting,
one square plate that attaches directly to the AP-5181 and two plates forming an adjustable
V-shaped clamp for pole mounting.
Mounting the AP-5181 on a Pole
1. Ensure the AP-5181 is oriented properly, and fit the edges of the V-shaped clamp parts
into the slots on the flat side of the rectangular plate.
2. Place the V-shaped bracket clamp parts around the pole and tighten the nuts just
enough to hold the bracket to the pole. (The bracket may need to be rotated around the
pole during the antenna alignment process).
3. Attach the square mounting plate to the access point with the supplied screws.
4.
Attach the AP-5181 and mounting plate to the bracket already fixed to the pole. If
necessary, use the “U-bracket” (included in the mounting kit), in conjunction with the
band clamp, to expand the diameter of the bracket to a maximum if 18 inches.
5. Secure the AP-5181 to the pole.
Note: The AP-5181 tilt angle may need to be adjusted during the antenna alignment process.
Verify the antenna polarization angle when installing, and ensure the antennas are oriented
correctly in respect to the AP-5181's coverage area.
Mounting the AP-5181 on a Wall
1. Ensure the AP-5181 is oriented properly, and attach the bracket to a wall with flat side
flush against the wall. Position the bracket in the intended location and mark the posi-
tions of the four mounting screw holes.
2. Drill four holes in the wall that match the screws and wall plugs.
3. Secure the bracket to the wall.
4. Attach the square mounting plate to the AP-5181 with the supplied screws. Attach the
AP-5181 to the plate on the wall.
5. Secure the AP-5181 to the bracket. Fit the edges of the V-shaped clamp parts into the
slots on the flat side of the rectangular plate.
Technical Specifications
Physical Specifications
Dimensions 12 inches long x 8.25 inches wide x 3.5 inches thick
Housing Aluminum
Weight 4 lbs.
Environmental Specifications
Temperature -30°C to 55°C (Operating), -40°C to 85°C (Storage)
Humidity 5% to 95% Non-condensing (both Operating and Storage)
Altitude 8,000 feet/2438 m @28°C (Operating)
15,000 feet/4572 m @12°C (Storage)
Electrostatic Discharge 15kV (air) @ 50% rh, 8kV (contact) @ 50% r
Drop Bench drop 36 inches to concrete
Wind Blown Rain 40 MPH @ 0.1inch/minute, 15 minutes
Rain/Drip/Spill IPX6 Spray @ 4L/minute, 10 minutes
Dust IP5X 20mb vacuum max, 2 hours, stirred dust, .88g/m^3
Electrical Specifications
Operating Voltage 48Vdc (Nom)
Operating Current 200mA (Peak) @ 48Vdc/170mA (Nom) @ 48Vdc
Antenna Specifications
The AP-5181 2.4 GHz antenna suite includes the following models:
Caution: The 2.4 and 5.5 GHz antenna models listed are rated for the AP-5181 model access
point and its intended outdoor deployment. The models listed are not intended for use on an
AP-5131 model access point.
Fit the edges of the
V-shaped part into the slots
Tighten the
securing bolts
Attach the square
plate to the bridge
Part Number Antenna Type Nominal Net Gain (dBi)
ML-2499-FHPA5-01R Omni-Directional 5.0
ML-2499-FHPA9-01R Omni-Directional 9.0
ML-2452-PNA7-01R Panel (Dual-Band) 8.0
ML-2452-PNA5-01R Sector (Dual-Band) 6.0
1
2
Résumé du contenu
Page 1 - AP-5181 Access Point
To the InstallerThis guide is intended for the technician responsible for installing the AP-5181 model access point. It assumes the technician is fam
Page 2 - Regulatory Information
(8) (10) (12) (14)(7) (9) (11) (13)The AP-5181 5.2 GHz antenna suite includes the following models: AP-5181 LEDsThe AP-5181 access point has four LEDs
Plus de documents pour Routeurs Motorola AP-5181 - Wireless Access Point
Produits connexes et manuels pour Routeurs Motorola AP-5181 - Wireless Access Point
(142 pages)
(74 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.524 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels