Motorola TIME WARNER DCT6208 Manuel d'utilisateur télécharger pdf (Page 6)

2 • Connecting Your External Drive 4

This document is uncontrolled pending incorporation in a Motorola CMS

Connecting Your External

Drive

This section describes how to connect an external drive to your Motorola DVR cable box

Guidelines:

• Requires connection of your external drive to the cable box’s eSATA port.

• USB connection currently not supported for external drive use.

• Supports up to 16 different external drives for use with a cable box.

• Only one external drive can be connected to your DVR cable box at one time.

• Do not place your external drive directly on top of your Motorola DVR cable box. Placing your

external drive directly on top of the cable box may result in overheating and damage the external

drive.

Instructions:

1. Connect the AC power cord to the external drive and plug the external drive’s AC power adapter

into an electrical outlet.

2. Allow approximately 15 to 30 seconds for the external drive to reach operating speed.

3. Connect one end of the eSATA cable to your Motorola HD/DVR cable box.

4. Connect the other end of the eSATA cable to the external drive.

5. Follow the on-screen instructions.

Multiple External Drives:

If you already have an external drive configured for use with your cable box and would like to format

an additional drive, simply disconnect your current external drive and connect the new external drive

to the cable box. Then, follow the on-screen instructions.

If you need assistance connecting an external drive, follow the instructions on the following pages.

1 2 3 4 5 6 7 8 9 10 11 ... 24 25

Pas de commentaire

Motorola TIME WARNER DCT6208 Manuel d'utilisateur Page 6