Motorola TIME WARNER DCT6208 Guide de l'utilisateur télécharger pdf (Page 44)

Problem Possible Solution

There is no audio

when viewing cable

channels

Verify that the MUTE button on the DCT* or the remote

control has not been pressed. Press MUTE on the remote

control to restore sound.

If the DCT* audio output is connected to the TV, verify

that the

MUTE button on the TV has not been pressed.

If the DCT* audio output is connected to a home theater

receiver, verify that the receiver is set to the appropriate

input source and the mute button on the receiver has not

been pressed.

Verify that you have the correct cables for the audio

ports.

Verify that the audio cables are firmly connected

between the DCT* and the audio playback device (TV,

receiver, etc.).

There is no audio

from the center

and/or surround

speakers of a home

theater receiver

connected to the

DCT*

Not all Dolby Digital programs feature full 5.1 surround

sound. In some cases, the programs may only contain

left and right stereo audio.

Verify that the SPDIF cable (coaxial or optical) is firmly

connected to the DCT* and the home theater receiver.

Verify that the home theater receiver is set to a surround

sound audio mode (Dolby Digital, Dolby Pro Logic II,

Dolby Pro Logic).

Verify that the receiver is properly configured to work

with all connected speakers.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49

Pas de commentaire

Motorola TIME WARNER DCT6208 Guide de l'utilisateur Page 44