Motorola MICOM-2TS Spécifications télécharger pdf (Page 43)

New ALE Features

Using Autodial

The Autodial feature lets you use a single digit to call a preprogrammed address.

There are ten programmable Autodial addresses, where each can include a message.

See Auto Dial Parameters on page 61 for details on programming the Autodial list.

➤ To use Autodial to send a call:

1. Press # on the keypad.

CALL

SELECT#_

MOTOROLA

Note

If you do not select an auto-address within a few seconds, the

display automatically reverts to the previous state.

2. Press the desired preprogrammed Autodial number

(0 to 9).

The programmed address is immediately displayed;

if a message is preprogrammed, an exclamation sign

will appear before the station name.

Press PAGE (F2) if you want to attach a message to

the call or to replace/edit a preprogrammed attached

message. See page 30.

CALL

1009

MOTOROLA

SEND PAGE CHAN MONs

Note

If the Autodial number you enter is not programmed, the message

NOT PROG will be displayed.

3. Press CHAN (F3) if you want the call to be initiated on a specific channel.

See page 30.

4. Press ENTER or SEND (F1) to start the call.

5. The radio now starts the link set up process. During this process, you will

see TO alternating with the number of the channel on which the set up

request is being sent (the channel may change, if the called station does not

answer on the first channel(s)).

Note

While the radio is initializing the link, you can press STOP (F1)

or ESC to abort the entire process.

_________________________________________________________________________________________________

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 75 76

Pas de commentaire

Motorola MICOM-2TS Spécifications Page 43