Motorola MICOM-2TS Spécifications télécharger pdf (Page 44)

MICOM-2ES/2RS/2TS ALE Supplement to Owner’s Guide

6. After the link is established, you will see a LINK message. Now you may

press the PTT and start talking.

7. To disconnect the link, press the ESC key.

Sending Messages

You can send messages (page) together with the initial call (before the link is set up),

and also whenever necessary while the link is already set up (that is, when your

station is in a link with the destination station).

In the link state, if you are making an individual call, both the receiving and the

calling station can send messages to the other station. This is also true for net calls

and group calls.

➤ To transmit an individual call with a message:

1. Initiate a call as explained above (page 25 or 26)

and select the desired station.

CALL

1009

MOTOROLA

SEND PAGE CHAN MONs

2. Press PAGE (F2) to add a message. The last sent

message is displayed.

AMD

5AM

MOTOROLA

SEND EDIT CHAN MONs

3. You may now select a different (stored) message or edit this message:

• Press the UP/DOWN keys to scroll to the

required message.

AMD11

11 AMD MESS

MOTOROLA

SEND EDIT CHAN <->s

• To edit the message, press EDIT (F2) and use

the keypad to enter a new message.

AMD

5AM

MOTOROLA

SAVE <-- --> CLR

4. Press SAVE (F1) when the message is ready.

5. Press SEND (F1) or ENTER to initiate the call.

CALL

1009

MOTOROLA

SEND PAGE CHAN MONs

6. Proceed with the call as explained above (page 25 or 26).

_________________________________________________________________________________________________

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

Motorola MICOM-2TS Spécifications Page 44

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Motorola MICOM-2TS