Motorola MICOM-2TS Spécifications télécharger pdf (Page 63)

New ALE Features

Note

During the bidirectional handshake process, you can press STOP

(F1) or ESC to abort the entire process.

➤ To execute a bidirectional handshake with a net:

1. Press LQA (F2) to enter the LQA menu.

LQA

MOTOROLA

BDIR SOND CHAN OK s

2. Press BIDR (F1).

The last called address is displayed. If this is the net

you want, skip directly to Step 8 below.

BDIR

1001

MOTOROLA

SEND PAGE CHAN OK s

3. Press MORE.

BDIR

1001

MOTOROLA

MULT PAGE CHAN OK s

4. Press MULT (F1).

BDIR

NET 1

MOTOROLA

SEND PAGE CHAN OK s

5. Press NET (F1).

BDIR

MOTOROLA

NET PAGE CHAN OK s

Note

You cannot change the net number at this stage – the bidirectional

handshake is always performed on the currently selected net. To

change the net, see page 24.

6. Press PAGE (F2) if you want to attach a message to the handshake.

7. Press CHAN (F3) if you want to initiate the handshake on a specific

channel.

8. Press SEND (F1) or ENTER to initiate the handshake. During this process,

you will see TO alternating with the number of the channel on which the

handshake is being sent.

Note

While the radio is initializing the handshake, you can press STOP

(F1) or ESC to abort the entire process.

_________________________________________________________________________________________________

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

Motorola MICOM-2TS Spécifications Page 63

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Motorola MICOM-2TS