Motorola MICOM-2TS Spécifications télécharger pdf (Page 67)

ALE Programming

This section provides concise instructions for using the ALE Programming mode.

This mode, reached under the PROG menu (see Figure 4 and Figure 5) is used to

configure the parameters needed by the ALE function. The ALE parameters are

identified in Figure 5.

Note

The Programming mode is accessible only if the radio is not

locked.

After locating the required ALE parameter in the Programming menu, you can

change it by pressing the function key next to the parameter name, and then press the

UP/DOWN keys to scroll or set parameters.

➤ To enter the ALE Programming mode:

1. Press MENU to display the Menu screen.

MOTOROLA

CHAN FREQ ALE BITs

2. Press MORE to scroll to the second Menu screen.

MOTOROLA

LOCK PROG PSW DIMs

3. Press PROG (F2).

4. Press ALE (F2) to enter the ALE Programming

mode.

PROG

MOTOROLA

RAD ALE LANG

5. Press MORE as required to access additional ALE

programming parameters.

ALE

PROGRAMMING

MOTOROLA

NET DIR AMD OPTs

In the ALE Programming mode, you can program the following features (see also

Figure 5).

Description See Page …

• NET

Net parameters: station names, options, members

and scanned channels.

• RCV

Edit the list of stations not appearing in the

directory from which calls have been received.

This item is displayed only after such calls have

been received, and therefore will not appear when

the MICOM-2 is just turned on.

_________________________________________________________________________________________________

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

Motorola MICOM-2TS Spécifications Page 67

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Motorola MICOM-2TS