Motorola MICOM-2TS Spécifications télécharger pdf (Page 7)

Warnings, Cautions and Notes

The following notations are used to place special emphasis on procedures, or to call

attention to precautionary measures.

Warning

An operating procedure, practice and so forth, which if not

followed correctly, could result in personal injury, or loss of life.

Important

An operating procedure, practice and so forth, which if not followed

correctly, could result in damage to, or destruction of equipment.

Note

An operating procedure, condition and so forth, to which special

attention should be paid.

General Safety Precautions

The following are general safety precautions that are not related to any specific

procedures and therefore do not appear elsewhere in this publication. These are

recommended precautions that personnel must understand and apply, in addition to

the precautions listed in the Information for Safe, Efficient Operation section.

Warning

High

Voltage

Do not touch the antenna and the RF connectors when the

transceiver operates.

During transmission, high RF voltages appear at the RF

connectors, the antenna cables, and on the antenna itself. These

voltages may cause severe injury or even death on contact.

Operating and maintenance personnel must be familiar with the

applicable safety requirements before attempting to install or

operate the transceiver. Severe injury or death could result from

failure to comply with the safety practices.

_________________________________________________________________________________________________

1 2 3 4 5 6 7 8 9 10 11 12 ... 75 76

Pas de commentaire

Motorola MICOM-2TS Spécifications Page 7