Motorola MICOM-2TS Spécifications télécharger pdf (Page 75)

ALE Programming

• AMD

Yes

• ILNK

• BDLK

When configuring ALE options, you do not need to define all parameters – change

only those for which the factory-default values are not suitable.

Auto Dial Parameters

Auto Dial enables you to set shortcuts for calls to frequently called stations, with or

without automatically attaching messages when a station is called:

• AUTO

Used to configure up to 10 autodial codes, numbered AUTO 0 to

AUTO 9.

• AMD

Used to prepare AMD messages for sending when an autodial

code is used. See message preparation details on page 30.

Note

If a message is attached to the address, an exclamation mark

precedes the address.

Storing ALE Parameters

Before exiting the ALE programming menu, you must store the parameters you have

programmed.

Important

If you press the MENU or ESC key to exit the programming mode

without first saving your changes, you will be prompted to store the

ALE configuration changes. Press YES to store the configuration.

If you press NO, the configuration will revert to the previous

configuration, and any changes made in the ALE programming

session will be ignored.

_________________________________________________________________________________________________

1 2 ... 70 71 72 73 74 75 76

Pas de commentaire

Motorola MICOM-2TS Spécifications Page 75