Motorola MICOM-2TS Spécifications télécharger pdf (Page 49)

MICOM-2E-ALE Owner’s Manual

Working in Transmit Mode

NOTE

Before transmitting, ensure that the RF output of the

radio is connected to a tuned antenna or to a dummy

load.

To transmit:

1. Press and hold down the Push-to-Talk (PTT) button on the side of the

microphone and speak slowly and clearly after the channel is clear.

The TX LED will remain lit until the PTT button is released to indicate that

you are “on-the-air”.

Checking the RF Power

When you press the PTT button, you will see on the display:

The received filter changes according to PTT activity.

Filter set to:

CW filter

After first CW PTT

LSM filter

After first data PTT and only if the filter

channel is programmed to LSM filter.

Voice filter

After microphone PTT or voice PTT.

HSM filter

After first data PTT and only if the filter

channel is programmed to HSM filter.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 131 132

Pas de commentaire

Motorola MICOM-2TS Spécifications Page 49