Motorola WIRELESS CABLE MODEM GATEWAY SBG900 - WARRANTY Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Logiciel Motorola WIRELESS CABLE MODEM GATEWAY SBG900 - WARRANTY. Motorola WIRELESS CABLE MODEM GATEWAY SBG900 - WARRANTY Setup guide Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 7
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
1
1 Connect the Power cord to the modem and a
wall outlet or surge protector
2 Connect the Cable line from the Cable jack
(or splitter) to the back of the modem.
3 Wait until the first four lights of modem are solid,
4 Connect computer to modem.
Your computer has an Ethernet card:
Connect an Ethernet cord from the back of your
computer to the Ethernet plug on the modem.
Your computer does not have an Ethernet card:
Connect a USB cord from the USB port on the
modem to an available USB port on the front or
back of your computer. Have the USB Driver disk/CD
ready before continuing. You will be immediately
asked to provide USB drivers when you connect the
USB cord to the PC and modem.
Note: USB may not work with Windows 95 or 98.
Your computer has neither Ethernet nor USB:
You will need to buy and install an Ethernet card for
your computer before continuing.
5 Open Internet Explorer (or other browser)
If service is ready and devices are connected properly,
you should see a “Cable Modem Login” screen. Type
your TCC Username (login) and Password. Your
password is case-sensitive. If you do not have your
password, contact our office and it can be picked up or
sent to you.
Ethernet
USB port
Initial connection requires a computer directly plugged into the modem via Ethernet or USB. Once a
wired connection is established, you can log into the router administration console to configure Wireless
Access and setup Security.
TCC Motorola SBG900 Setup Guide
Connectin
g
y
our Moto
r
ola SBG900 Cable Modem
Vue de la page 0
1 2 3 4 5 6 7

Résumé du contenu

Page 1

1 1 Connect the Power cord to the modem and a wall outlet or surge protector 2 Connect the Cable line from the Cable jack (or split

Page 2

2 On a computer wired* to the SBG900 over Ethernet or USB, open a web browser. * Do not attempt to configure the SBG900 over a wireless connect

Page 3 - Name & Channel

3 To configure the ESSID: Start the SBG900 Setup Program as described in .Starting the SBG900 Setup Program.. On the left frame, click Wireless. C

Page 4 - on the SBG900

4 Encryption is very important to keep non-authorized users from using your connection. This would not only make your connection slower but they pe

Page 5 - Firewall Protection

5 The SBG900 firewall protects the SBG900 LAN from undesired attacks and other intrusions from the Internet. This section shows you how to setup a F

Page 6

6 Front/Back of modem The lights are the best connection indicators. If the Receive, Send or Online lights are this usually indicates a Cable Line

Page 7 - Other troubleshootin

7 If you have trouble with your connection, try the following: A) Check the lights on the modem Power, Send, Receive and Online should be ON

Commentaires sur ces manuels

Pas de commentaire