Motorola MC65 Manuel d'utilisateur télécharger pdf

100

Mbps

1 Scan/Action Button

2 Up/Down Buttons

3 Microphone

4 Power Buttons

5 I/O Connector

6 Keypad

7 Scan/Action Button

8 Touch Screen

(with screen protector)

9 Scan/Decode LED

10 Charging/Battery

Status LED

11 WAN Radio Status LED

12 Phone Speaker

13 Light Sensor

14 Handstrap

15 Battery

16 Battery Latch

17 Camera Flash (optional)

18 Camera (optional)

19 Exit Window

(see Data Capture Options)

20 Tether

21 Scan/Action Button

22 Action Button

23 Stylus

24 Speaker

1 Talk

2 Navigation

3 Soft Key

4 Scan/Action Button

5 End

Note 1: To reset the MC65, simultaneously press the 1 key, 9 key and Power button.

FEATURES

Numeric Keypad

Alpha-Numeric Keypad

CHARGING

MC65

Quick Start Guide

Blue Key

Use this key to access function keys shown on the keypad

in blue.

Orange Key

Use this key to access the secondary layer of characters

and actions.

Press the Blue key once to activate this state temporarily,

followed by another key.

Press the Blue key twice to lock this state.

Press the Blue key a third time to unlock.

Press the Orange key once to activate this state

temporarily, followed by another key.

Press the Orange key twice to lock this state.

Press the Orange key a third time to unlock.

Notifications

Charging/Battery Status LED:

Data Capture LED:

Slow blinking amber: Battery charging

Solid amber: Fully charged

Fast blinking amber: Charging error

Red: Scanning active

Green: Good Decode

Message Notification

Data Capture

Charging/Battery Status

WAN Radio Status

WAN Radio Status LED:

Green: RF active

Charge the MC65

Charge the Battery

Slow Blinking Amber = Charging

Charging/Battery Status LED

Solid Amber = Fully charged

Fast Blinking Amber = Charging error

Before using the MC65, ensure that the

battery is fully charged.

Use the Single-slot USB cradle,

or Four-slot cradles (Charge Only or

Ethernet) to charge the battery in the MC65.

You can also use the Charge Only and

USB/Charging cables to charge the MC65.

Charge a spare battery using the

Single-slot cradle.

Note: The 3600 mAh battery charges in less than six hours.

Use the Four-slot Battery Charger

to charge batteries separately.

Note: Remove protective shipping film that covers the touch screen, exit window and camera window

before using.

Press the Orange key once to lock the keypad into

Alpha state.

Press the Orange key a second time to return to the

normal state.

Press the Blue key once to activate this state, followed by

another key.

Blue Key

Use this key to access function keys shown on the keypad

in blue.

Orange Key

Use this key to access the secondary layer of characters.

(Note 1)

6 Orange Key

7 Backlight

8 Blue Key

9 OK

10 Start Menu

PHONE SETUP/ACTIVATION

GSM/UMTS Activation

Press the Power button to turn on the MC65.

If a SIM card from a supported carrier is installed, the MC65 detects the installed

activated SIM card and activates on the GSM/UMTS network and configures the

data connections.

If a SIM card from an unsupported carrier is installed, the MC65 detects the

installed activated SIM card and activates on the GSM/UMTS network, but the

data connection and the MMS connection information must be manually

configured.

Refer to the MC65 Integrator Guide for more information.

To activate the MC65 on a CDMA network:

1. Press the Power button to turn on the MC65.

2. Tap Start > Settings > Connections > Phone Network Setup.

3. On the CDMA tab, select a carrier from the preferred network option.

4. Tap the Start Activation button.

5. Tap Yes to activate.

6. Call the carrier from an existing phone to request over-the-air activation.

7. When instructed by the operator press Activate Now button.

For detailed information on activating the MC65, refer to the MC65 Integrator Guide.

MicroSD Card Installation (Optional)

1. Remove the handstrap.

2. Lift the rubber access door.

3. Slide the SIM card holder up to

unlock.

4. Lift the SIM card holder.

5. Carefully lift the microSD card holder.

6. Insert the microSD card into the

card holder.

NOTE :

Proper position of the microSD card — the

card connector (i.e., gold contacts) should be

facing out as shown.

7. Gently lower the microSD card holder

until it snaps into place.

SIM Card Holder

microSD Card Holder

Rubber Access Door

GETTING STARTED

Install the Battery

Remove the Battery

1. Insert the battery, bottom first, into the battery compartment.

2. Press down on the battery until the battery latch snaps

into place.

3. Replace the

handstrap.

1. Press and hold the Power button for

approximately 10 seconds.

2. Release the Power button. The Data

Capture LED lights red.

3. When the LED turns off, remove the

handstrap.

4. Slide the battery latch to the right. The

battery ejects slightly.

5. Grasp the battery and lift from the MC65.

BATTERY INSTALLATION

SIM Card Installation (Optional)

8. Insert the SIM card into the SIM holder.

NOTE :

The proper position of the SIM card—the card

connector (i.e., gold area) should be facing outward

with the beveled corner facing away.

9. Lower the SIM card holder.

10. Slide the SIM card holder down to lock into place.

11. Close the rubber access door.

12. Install the battery.

1 2

Quick Start Guide 1

Résumé du contenu

Page 1 - Quick Start Guide

100Mbps11222361158123791012734312343251234357268861091091918142015162217212324131 Scan/Action Button2 Up/Down Buttons3 Microphone4 Power Buttons5

Page 2

AVOID EXTREME WRIST ANGLESAVOID EXTREME WRIST ANGLESAVOID EXTREME WRIST ANGLESAVOID EXTREMEWRIST ANGLESCharge Only CableMC65Quick Start GuideMOTOROLA

Commentaires sur ces manuels

Pas de commentaire

Motorola MC65 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Téléphones Motorola MC65. MC65 Quick Start Guide [English] (P/N 72-134041 Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Téléphones Motorola MC65