Motorola MTM5400 Guide de l'utilisateur télécharger pdf (Page 120)

113

•Check

the capacity of the active scan list (number of

groups stored in the list).

•To Clear all groups from the selected scan list, press

Yes. You will be prompted to remove all groups from the

selected scan list.

• Add a group to the selected scan list. Every added

group (including a favourite group) comes with its folder,

its name or number, and its priority (if pre-programmed).

> To select a folder, scroll through the folder list. The list

does not show folders whose groups are fully used in

the selected scan list. Press Ok to select a folder.

> To select a group, scroll through the group list within

the selected folder. The list shows groups that are not

in the selected scan list. Press Ok.

> To set a priority to a group, scroll through the priority

list: high, medium, or low.

A call from a high priority group will interrupt an on-

going call with a medium and low priority.

A call from a medium priority group will interrupt an

on-going call with a low priority.

A call from a low priority group will not interrupt any

on-going call.

• Edit

the scan list groups.

> Scroll to the group you wish to remove from the

selected scan list, press Menu and press Delete. You

will be prompted to remove the selected group. After

a few seconds, the display shows the updated scan

list.

> To change the group priority, press Priority. Scroll to

the selected priority and press Select.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 175 176

Pas de commentaire

Motorola MTM5400 Guide de l'utilisateur Page 120