Motorola MTM5400 Guide de l'utilisateur Page 15

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 176
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 14
8
Getting Started
Uninstalling the Terminal
Powering On/Off (On-Off/End/Home Key or Rotary
Knob Push Button)
To power on:
Press and hold or the On push button
If the MTM5400 is configured with ignition sense, the
terminal will automatically turn on whenever the vehicle
ignition is turned on.
If an Emergency Foot Switch is connected to the
accessory connector and “Emergency with wake up” is
enabled by your Service Provider, the MTM5400
automatically turns on in Emergency Mode whenever the
Emergency Switch is pressed (see Emergency in TMO on
page 69. and Emergency in DMO on page 76.).
Your MTM5400 performs a self-check and registration
routine. After successful registration, the MTM5400 is in
service.
To power off:
Press and hold .
If the terminal is powered on via the ignition, it can be
turned off via the ignition or press and hold .
You will see the Powering Off message.
OPTION 1:
Before disconnecting the 13.2V main power supply
from the terminal:
1. Switch off the terminal.
2. Wait for a minimum of 4 seconds after the
terminal Off Switch is released.
Disconnect the 13.2V main power supply.
OPTION 2:
Turn off the main power supply WITHOUT
switching OFF the terminal.
The terminal powers On and Off without visible and audible
notification if Covert Mode is activated. (Refer to Covert Mode
on page 32..)
Vue de la page 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 175 176

Commentaires sur ces manuels

Pas de commentaire