Motorola MTM5400 Guide de l'utilisateur télécharger pdf (Page 34)

Incoming Calls During Dialing

The MTM5400 remains affiliated to the last Talk Group and

receives any group calls. An Incoming call is indicated to the

user and the dialing process is interrupted. Non-emergency

call does not suspend dialling but the user is able to hear the

tone of incoming call. When the terminal receives a private or

a phone call, termianl indicates and gives the option to the

user to reject or accept it. If the user accepts the call, dialling

process ends. When the user rejects it the terminal goes

back to the dialling process.

Entering Emergency Mode During Dialing

The dialing process stops if during it the user tries to go to

emergency mode

Incoming Long Text Message During Dialing

The Long Text Message is indicated on the display and it

interrupts the dialing process.

Changing Call Type

By dialing from the idle screen the user is given the possibility

to change the Type of the Call.

Modifying the Type of Call

The infrastructure can modify the type of call you started.

For example, you might start a Simplex Private Call, and the

infrastructure could modify the call to a Group Call.

The terminal will alert you of the modification and will display

the following messages, depending on the type of call:

• Call Modified (to Duplex)

• Call Modified Use PTT (modified to Simplex)

Continue the modified call depending on the type of call.

• Simplex Private Call modified from direct setup to hook setup:

a ringing tone will alert of the change.

• Simplex Private Call modified from hook setup to direct setup:

there will be no indication of the change.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 175 176

Pas de commentaire

Motorola MTM5400 Guide de l'utilisateur Page 34