Motorola MTM5400 Guide de l'utilisateur Page 53

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 176
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 52
46
DMO Group Call
DMO Group Call
General
In DMO, the MTM5400 can be used without your Service
Provider’s infrastructure.
Direct Mode allows communication with other terminals also
operating in Direct Mode, which are on the same frequency
and talkgroup as your MTM5400.
You can receive a call:
From the selected talkgroup
From other users within talkback range (if configured by
your Service Provider). This is called an InterMNI (Mobile
Network identity) call.
From an open group. (An open group is a super-group to
which all DMO groups belong.)
When you start a call, the members of the selected talkgroup
who have their units turned on, and are within the group
subscriber identity (as configured by the Service Provider),
will receive the transmission.
In DMO the MTM5400 can communicate with the trunking
system (and vice-versa) if the Gateway option is enabled in
the MTM5400.
To enhance the terminal’s DMO coverage area the DMO
group can link to a repeater if the Repeater option is enabled
in the terminal. Additionally the GW + Rep (gateway and
repeater) communication mode can be used.
If Transmit Inhibit is activated while the terminal is set to
DMO, the PTT is disabled. You can only listen. For detailed
information on Transmit Inhibit, see page 42. DMO Talkgroup
selection is allowed when Transmit Inhibit is activated.
In DMO it is only possible to place Group Calls, Emergency
Group Calls and Private Simplex Calls.
Vue de la page 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 175 176

Commentaires sur ces manuels

Pas de commentaire