Motorola MTM5400 Guide de l'utilisateur Page 77

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 176
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 76
70
Emergency Operation
Emergency Private Call (Simplex or Duplex)
The terminal will start an Emergency Private Call to a pre-
defined ID when you press and hold the Emergency button.
If an Emergency Private Call gets modified to an Emergency
Group Call, the terminal will enter Emergency Mode and will
leave the Emergency Mode when the call ends.
Emergency Private Call and Emergency Alarm
If the address type is set to Private and Emergency Alarm is
enabled, press the Emergency button to send the emergency
alarm to the address configured by the Service Provider.
When those requirements are satisfied the Emergency Call is
initialized.
Changing Folder or Group
See Group Call section on page 34.
Entering or Exiting Emergency Mode
Upon entry into Emergency Mode any existing call or service
will be aborted or cleared down.
In Emergency Mode, the terminal will automatically reject
Phone, PABX and Private Calls, and will not monitor the
groups in the user selected scan list. If an ATG is the
selected group, however, the terminal will monitor the sub-
groups associated with the ATG. The terminal will remain in
Emergency Mode until you exit it.
Press and hold the Emergency button to
enter Emergency Mode.
When the MTM5400 is Off, press this
button to power the MTM5400 On in
Emergency Mode (if configured).
Network 1
Folder 1
TalkGroup 1
Hello
Exit
Optns
Vue de la page 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 175 176

Commentaires sur ces manuels

Pas de commentaire