Motorola MTM5400 Guide de l'utilisateur Page 84

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 176
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 83
77
From an open group. (An open group is a super-group to
which all DMO groups belong.)
Emergency calls can be placed via gateway and repeater.
For gateway and repeater settings, see “Gateway/Repeater
Selection” on page 48.
Hot Microphone Feature in DMO
This functionality allows the user, that is in emergency
situation, to be heard without pressing the PTT. It needs to be
enabled by your Service Provider for DMO mode. For the
detailed functionality please see Hot Microphone Feature in
TMO.
Changing Folder or Group
Proceed as explained in the Group Call section, “TMO Group
Call” on page 34.
Making an Emergency Group Call
To initiate or answer a call:
1. Enter Emergency Mode by pressing the Emergency
button.
2. Press and hold PTT.
3. Wait for the talk permit tone (if configured) and talk.
4. Release PTT to listen.
When the terminal is in emergency mode and it switches from
TMO to DMO (and vice versa), the Hot Mic feature is still active.
Your MTM5400 enters TMO by pressing the Emergency button
(if configured by your Service Provider). The terminal attaches
to the predefined talkgroup and starts the Emergency Group
Call. If the predefined talkgroup is invalid the terminal attaches
to the last selected talkgroup.
Vue de la page 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 175 176

Commentaires sur ces manuels

Pas de commentaire