Motorola HDT101 Manuel d'utilisateur télécharger pdf (Page 51)

TROUBLESHOOTING

If you encounter a problem with your HDT101, review this

troubleshooting section before calling your service provider. This

information will help you quickly solve a problem. If you’re unable to

solve the problem, contact your service provider.

Problem Possible Solutions

The POWER LED on

the front panel does

not light up

Confirm the power cord is plugged into a functioning

power outlet.

Press POWER on the front panel to see if the LED

lights up.

Determine if the HDT101 is in standby mode by

pressing STANDBY on the remote control.

No picture

Verify that all cables are connected properly

(hand-tighten if necessary).

If you are watching TV using your VCR, be sure your

VCR is on.

Verify that the TV is directed to the proper input

source.

Your TV may not support the current video output

format. Press

V. FORMAT to try another format.

Poor picture

quality

Verify that all cables are connected properly

(hand-tighten if necessary).

Check the antenna and make sure it is aligned to the

correct direction.

Check the signal’s strength and quality. Press

INFO to

display the i-Banner and review the color bars at the

bottom of the window. If any of the bars are red, adjust

your antenna and try again.

1 2 ... 46 47 48 49 50 51 52 53 54

Pas de commentaire

Motorola HDT101 Manuel d'utilisateur Page 51