Motorola CPEI 150 series Manuel d'utilisateur télécharger pdf (Page 24)

68P09291A19-C 4-5

APR 2009

Advanced Configuration 4

Be sure to click the Apply button once you have made changes.

Lease Status Tab

The Lease Status tab in the Local Address menu displays the active DHCP leases since

the last reboot.

Be sure to click the Apply button once you have made changes.

Lease Reservation Tab

This tab allows you to manage the lease reservation so that the same client receives

the same IP address each time.

DHCP Starting IP Address Sets the first IP address assigned by the

DHCP server, in dotted-decimal format. It

must be greater than the IP address value

of the gateway. For example, if the IP

address of the gateway is 192.168.15.1

(default), the starting IP address must be

192.168.15.2 (or higher).

DHCP Ending IP Address Sets the final IP address assigned by the

DHCP server. If the DHCP server runs out

of DHCP addresses, users cannot access

network resources. If this happens,

increase the Ending IP (to the limit of 254)

or reduce the Lease Time.

krowten a taht ,sdnoces ni ,emit eht steSemiT esaeL PCHD

computer remains connected to the

gateway using its current assigned IP

address. At the end of this time, the DHCP

server renews the lease or assigns the

computer a new IP address. The default is

1 hour. The maximum is about 278 hours.

Table 4-3 DHCP Server Tab Fields

Field or Button Description

Table 4-4 Lease Status Tab Fields

Field or Button Description

eht syalpsiDemaN tsoH tneilC client host name. The Name

field is limited to 20 characters (only 5

appear in display).

.sserdda )CAM( lortnoC sseccA aideMsserddA CAM

PI eht swohSsserddA PI Address for each active

lease.

Remaining Lease Duration Shows the amount of time, in seconds,

remaining in the lease.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Pas de commentaire

Motorola CPEI 150 series Manuel d'utilisateur Page 24