Motorola HIGH-DEFINITION OFF-AIR TUNER HDT100 Guide de l'utilisateur télécharger pdf (Page 35)

Adding a Channel

If you wish to add a specific channel to your program list or you have

made minor adjustments to your antenna, follow these steps for adding a

single channel:

1 Press MENU on the remote control or MENU/ENTER on the front panel.

The Menu screen is displayed.

2 Highlight Installation and press SELECT. The Password window is

displayed.

3 Enter your four-digit password. If you have not yet created your own

password, enter the default password: 0000. The Installation menu is

displayed.

If you wish to change your password, see “Changing Your

Password” on page 28.

4 Highlight Manual Scan and press SELECT. The Manual Scan window

is displayed:

5 Use the number keys on the remote control to enter the channel

number. Press the " key and then press

SELECT to start the scan.

If the channel is successfully added, the “Get Channel Success”

message is displayed.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Pas de commentaire

Motorola HIGH-DEFINITION OFF-AIR TUNER HDT100 Guide de l'utilisateur Page 35