Motorola DC600 Spécifications télécharger pdf (Page 26)

DC600 Portal Integrator Guide2-8

Powering the XR400

If replacing the XR400 Reader within the DC600 for any reason, shut off power to the DC600 system before disconnecting power from

the reader.

Applying power to the XR400 reader before establishing proper grounding can cause a benign spark.

Adhere to the following procedures to ensure proper grounding.

To power the reader:

1. Insert the power supply's barrel connector into the XR400's power port.

2. Turn on the power switch on the DC600 Electronics Module. The green Power LED on the XR400 lights to indicate the XR400

is powered on.

To power down the reader:

1. Turn off the power switch on the DC600 Electronics Module. The green Power LED turns off to indicate that the device is

powered off and the system is not operational.

2. Remove the barrel connector from the XR400's power port.

Do not power off the XR400 until the yellow LED is off, indicating that reads are not in process.

Note

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 49 50

Pas de commentaire

Motorola DC600 Spécifications Page 26