Motorola MT2070 Guide de l'utilisateur télécharger pdf (Page 157)

100

101

Chapter 4 Radio Communications

Introduction

This chapter provides information about the modes of operation and features available for wireless communication

between MT20X0s, cradles and hosts. The chapter also includes the parameters necessary to configure the

device.

The device ships with the settings shown in the Table 4-1 on page 4-2 (also see Appendix A, Standard Default

Parameters for all host device and miscellaneous device defaults). If the default values suit requirements,

programming is not necessary.

To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile

memory and are preserved even when the device is powered down.

If not using a USB cable with the cradle, select a host type (see each host chapter for specific host information)

after the power-up beeps sound. This is only necessary upon the first power-up when connected to a new host.

To return all features to default values, scan a bar code in Set Default Parameter on page 5-4. Throughout the

programming bar code menus, default values are indicated with asterisks (

*).

Scanning Sequence Examples

In most cases, scan one bar code to set a specific parameter value.

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

*Disable Pair on Contacts

Feature/Option* Indicates Default

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 559 560

Commentaires sur ces manuels

Pas de commentaire

Motorola MT2070 Guide de l'utilisateur Page 157

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de codes-barres Motorola MT2070