Motorola DCH3416 Guide de l'utilisateur télécharger pdf (Page 39)

7 CONNECTING YOUR DCH RECEIVER

Connecting an A/V Receiver, TV, and VCR

1. Connect a stereo audio cable to the AUDIO OUT L and R connectors on the DCH

receiver and the INPUT L and R connectors on the A/V receiver.

2. Connect a video cable to the video out connector on the DCH receiver and the cable/TV

video connector on the A/V receiver.

3. Connect a stereo audio cable to the VCR AUDIO OUT L and R connectors on the A/V

receiver and the INPUT AUDIO L and R connectors on the stereo VCR.

4. Connect a stereo audio cable to the OUTPUT AUDIO OUT L and R connectors on the

stereo VCR and the VCR AUDIO IN L and R connectors on the A/V receiver.

5. Connect a video cable to the input video connector on the stereo VCR and the video

VCR OUT CONNECTOR on the A/V receiver.

6. Connect a video cable to the output video connector on the stereo VCR and the video

VCR IN connector on the A/V receiver.

7. Connect a video cable to the input video connector on the Stereo TV (SDTV) and the

TV/monitor output video connector on the A/V receiver.

If your equipment supports it:

• The digital audio optical (OPTICAL S/PDIF) or digital audio (COAXIAL S/PDIF)

audio outputs may be used in place of the stereo audio outputs (AUDIO L and R).

In most cases these outputs offer a higher level of audio quality, including

support for Dolby Digital 5.1 audio.

• S-Video connections may be used in place of the standard composite video

connections. In most cases, S-Video offers a higher level of standard definition

video quality than composite video.

These video connection methods do not support HD video. If you have an HDTV, see

Connecting your DCH Receiver to an HDTV — Video Only on page 19.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 47 48

Pas de commentaire

Motorola DCH3416 Guide de l'utilisateur Page 39