Motorola RG2200 Guide de l'utilisateur télécharger pdf (Page 44)

VERIFYING THE TV CODES

To playback the TV code:

For example, code 130 would show as the following:

<pause> <long blink> <off> (represents 1)

<pause> <long blink> <long blink> <long blink><off> (represents 3)

<pause> <short burst of flickering blinks> <off> (represents 0)

SRC-300 SRC-200

1. Press the LED key and hold it down until the LED

flashes rapidly.

2. Press the INFO key. The LED stops blinking at this

point and stays on solid.

3. Press and release the C key. The remote is now in play-

back mode.

4. Observe the LED. The TV code will be indicated by a

blink sequence for each number. See example below.

1. Press the MUTE button and hold it down until the LED

at the top of the remote control flashes rapidly.

2. Press the FAV button. The remote is now in playback

mode.

3. Observe the LED. The TV code will be indicated by a

blink sequence for each number. See example below.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 87 88

Pas de commentaire

Motorola RG2200 Guide de l'utilisateur Page 44