Motorola MC1000 Guide de l'utilisateur télécharger pdf (Page 52)

3 - 6 MC1000 with Windows CE 5.0 User Guide

Four Slot Ethernet Cradle

This section describes how to set up and use a Four Slot Ethernet cradle with the mobile computer. For Ethernet

communication setup procedures refer to the MC1000 with Windows CE 5.0 Integrator Guide.

Figure 3-3

Four Slot Ethernet Cradle

The Four Slot Ethernet cradle:

•

Provides 5.4 VDC power for operating the mobile computer.

•

Connects the mobile computer (up to four) to an Ethernet network.

•

Simultaneously charges up to four mobile computers (with batteries installed).

You cannot ActiveSync using the Four Slot Ethernet cradle. To ActiveSync with a host computer, use the SIngle

Slot Serial/USB cradle.

Prior to placing the MC1000 into the Ethernet cradle, set the MC1000 to USB Host mode.

1. Press F - CTRL - F - ESC to launch the Start menu.

2. Use the scroll keys to select Settings - Control Panel.

3. Press ENT.

4. Use the scroll keys to select the USBConfig icon.

5. Press ENT. The USBConfig Settings window appears.

CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 9 A. Use of an alternative

power supply will void the product warranty and may cause product damage. See the MC1000 User Guide

for the power supply regulatory compliance statement.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 79 80

Pas de commentaire

Motorola MC1000 Guide de l'utilisateur Page 52