Motorola MC3000 Guide de l'utilisateur télécharger pdf (Page 31)

Getting Started 1-13

Strap/Door Assembly Removal and Replacement

The Strap/Door Assembly consists of a hand strap and the battery door. There are two versions of this assembly, one for the Standard

Battery and one for the Extended Life Battery. Before removing the Strap/Door Assembly, press the red Power button to turn off the

screen and set the mobile computer to suspend mode.

To remove the Strap/Door Assembly:

1. Rotate the latches to the open position.

2. Pull the strap to lift the Strap/Door Assembly off, bottom first.

3. Use a #00 Phillips screwdriver to remove the two screws securing the mounting clip to the mobile computer.

4. Lift the mounting clip.

5. Slide the mounting clip out of the strap loop.

Reverse the procedure to replace the Strap/Door Assembly.

Figure 1-9. Strap/Door Removal and Replacement

Strap/Door

Assembly

Latches

Screws

#00 Phillips

Screwdriver

Mounting

Clip

Strap Loop

Mounting

Clip

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 113 114

Pas de commentaire

Motorola MC3000 Guide de l'utilisateur Page 31