Motorola MC67 Guide de l'utilisateur télécharger pdf (Page 144)

9 - 4 MC67 User Guide

Locking the MC67

Use the Password window to set a password to disable unauthorized access to the MC67.

1. Tap > Settings > Lock.

Figure 9-1

Password Window

2. Select Prompt if device unused for check box to enable password protection.

3. From the drop-down list, select a time value for the protection to take affect after non-use.

4. From the Password type: drop-down list, select either Simple PIN or Strong alphanumeric.

5. For a simple password, enter a four-digit password in the Password field.

For a stronger password:

a. Enter a seven character password in the Password: field. A strong password must contain at least

seven characters and contain at least three of the following: uppercase and lowercase letters,

numerals, and punctuation.

b. Re-enter the password in the Confirm: field.

6. Tap OK.

7. Tap OK.

Power Settings

To set the MC67 to turn off after a short period of non-use:

1. Tap > Setting > System > Power.

NOTE If the device is configured to connect to a network, use a strong (difficult to figure out) password to help

protect network security. Password cracking tools continue to improve and the computers used to crack

passwords are more powerful than ever.

If the user enters an incorrect password eight times, the user is requested to enter a code before trying

again.

If the user forgets the password, contact the system administrator.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 223 224

Pas de commentaire

Motorola MC67 Guide de l'utilisateur Page 144