Motorola C200 - MANUEL 2 Spécifications télécharger pdf (Page 27)

5.4 Maintenance, repair, cleaning

5.4.1 Repair

Proceed as follows in case of repair:

▶

Fill in the fault report form in the attachment (can also be sent per Fax).

▶

When possible, replace defective parts.

▶

Send the defective part back to ELAU.

5.4.2 Cleaning

How to remove dust and foreign objects from the drive:

▶

De-energize PacDrive Controller.

▶

Remove PacDrive Controller.

CAUTION

IMPROPER CLEANING

•

Use cleaning processes appropriate to the protection class of controller.

•

Do not use any alkaline detergent because the polycarbonate can loose its

stability if you have contact with it.

•

Do not use any cleaning fluid, as this will damage the motor's aluminum

housing.

Failure to follow these instructions can result in equipment damage.

▶

Then blow out PacDrive Controller with dry pressurized air (max. 1 bar).

5.5 Spare part inventory

Keep a stock of the most important components to ensure that the equipment is func‐

tioning and ready for operation at all times.

You may only exchange units with the same hardware configuration and the same

software version.

Indicate the following information on the spare part order:

Item name: e.g. PacDrive C200/10/1/1/1/00

Item no.: e.g. 13130260

Hardware code: HW: 2JA0233012

Software version: SW: 00.22.06

You will find this information on the type plate and in the controller configuration of the

PacDrive System.

5.4 Maintenance, repair, cleaning

ELAU GmbH PacDrive Controller C200 Page 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 42 43

Pas de commentaire

Motorola C200 - MANUEL 2 Spécifications Page 27