Motorola HIPTOP SLIDE Manuel d'utilisateur télécharger pdf (Page 16)

Warning

Device Basics

Battery Charger

Your device comes with a built-in rechargeable lithium-ion polymer battery. The

battery should be fully charged when you receive your device, but if it isn’t,

follow the instructions below to charge the battery.

Only use the battery charger provided with your device to charge your battery,

or you risk damaging your device.

1 Attach the battery charger to your device.

Locate the battery charger that came with your device in the box. Insert

the charger lead (the small round end of the adapter) into your device’s

power jack (the small round hole located on the lower right side of your

device) and plug the power cord into a standard electrical wall outlet.

A lightning bolt icon will appear over the battery icon (in the title bar),

indicating the charger is connected and the battery is charging. Note that

if your device has discharged completely, it may take up to 15 minutes

before you see any indication of charging on the screen.

III.

16 Device Basics

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 60 61

Pas de commentaire

Motorola HIPTOP SLIDE Manuel d'utilisateur Page 16