Motorola AT Commands G24-L Spécifications télécharger pdf (Page 10)

Telit G30 has an internal optional SIM chip and external interface to SIM connector same as

G24-L.

In addition G30 module supports:

When external SIM is connected:

 Connect all SIM signals to the external SIM pins(VSIM , SIM_RST, SIM_IO,

SIM_CLK, SIM_PD_n)

 Verify that eSIM_RESET (pin 56) is left unconnected

When eSIM is used:

 Verify that the following signals are not connected: VSIM, SIM_IO, SIM_CLK

 Connect SIM_RST pin to eSIM_RESET pin via O ohm resistor

 Connect SIM_PD_n pin to GND via O ohm resistor in case the SIM detection is

disabled by SW (+MSMPD command)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Pas de commentaire

Motorola AT Commands G24-L Spécifications Page 10